KINGCAMP Rainproof Light
The KingCamp 19 LEDs RAINPROOF LIGHT is the perfect companion for those that enjoy camping or any other outdoor pursuit. Its self-powered dynamo charged battery can provide unlimited power where other lanterns would become useless as soon as their batteries are drained. The dynamo lantern features 4 settings: an ultra bright 16 LEDs spotlight torch, a 16 LEDs Lantern, a 3 red LEDs and a 3 red LED SOS Beacon. The dynamo mechanism provides up to 25 minutes of usage time for every minute of cranking (based on 3 cycles/sec) so using it for extended periods won’t tire you out. It builds with IP44 rating to withstand wet conditions and water splashing to guarantee your normal use in some rainy days. You also can stick it onto iron objects when necessary.
KINGCAMP Adjustable Rechargeable Lantern
Material(s)
Bamboo, Iron , Plastic
Dimensions
126*230mm
Batteries
lithium battery 18650*2pcs/AA*3
Average Run Time
8-75 hours(Li-on battery 5000mAh)
Best Use
Camping
Weight
683g
KickAss White-Amber 12V LED Light Kit
New & improved LED light kit. Features an easy fit bag with heavy duty zip, one-touch dimmer plus white & amber lights!
High Quality Waterproof Silicone
Enclosed Circuitry in high-grade silicone means multiple layers of protection, while not interfering with brightness and your KickAss 12V LED Camping light kit will not yellow over time.
Overload Protection And Waterproof Connection
15A fuse protect against any potential short circuits and features waterproof connection and blanking pin.
High Powered Light Bars
High Quality led lights put out the maximum light possible while drawing an incredibly small amount of power. Minimising battery use and maximising run time.
Diverse Mounting Options
Use the strong magnets for attaching to any metal surface or the mounting tabs for permanent installation and the ties for everything else.
Premium Dimmer Switch
New touch-style dimmer switch. Tap the hand to change modes and hold down to dim.
White & Amber Modes
Switch between white and amber lights with the touch of a button. Simply tap the dimmer switch to change modes.
Easy Fit Bag and Heavy Duty Zip
Easily store your kit after usage in our scuff resistant bag.
Plug And Play Design
Easy installation allows you to create a unique setup to suit your situation.
KickAss Premium Plug & Play DCDC With Wiring Kit
New three pin Anderson connector with built-in ignition wire, takes the hassle out of connecting your 12V dual battery system. Includes everything for a professional DIY install. Perfect for wiring DC-DC chargers, battery boxes, auxiliary batteries and more.
Introducing our all new ultimate dual battery system wiring kit now featuring three pin 50 amp Anderon style connector with ignition wire.There is nothing like having the right parts to get the job done and the team at KICKASS have done just that in developing a premium plug and play wiring kit for installing a range of dual battery systems. We have carefully designed this premium kit for ultra easy DIY fittings. This wiring kit is now even easier to install with the pre-installed 80amp maxifuse and now features a three pin 50 amp Anderson connector with an ignition wire.
These kits are completely plug and play for any system that uses Anderson connectors for chagrin input and have everything you need for a professional wiring installation.The premium wiring kit now has our famous Maxifuse cable pre-installed into 6 Metres of Heavy Duty 8 B&S Cable, providing 50A of circuit protection. Now featuring the all new 3 Pin Anderson plug. Take the hassle out of connecting your 12V dual battery system. The built-in ignition wire into a three pin Anderson connector allows for easier installation, and removes the need to run multiple cables through your vehicle.
This cable is pre-crimped with Anderson connector terminals which makes it easy to run through holes and grommets. Once the cable is run, all you need to do is clip the Three Pin Anderson connector on. The kit also includes cable ties for securing the main cables, a spare 80A Maxifuse, 3m tail ignition wire and spare Anderson connector terminals
DOBINSON 90 Watt LED Spotlight
DOBINSONS 7 Inch LED DRIVING LIGHT PAIR WITH 90 WATT AND 7200 LUMENS PER LIGHT
90w (10 – 30v DC) 175mm (7Inch) Diameter Shallow Design
18 x 5w Cree LED Bulbs per light Waterproof connectors
50 000 Hours Life Span 6500K Color Temperature
IP68 Water and Dust Proof Rating
Heavy Duty Steel Mounting Base with Locking Bolts for Increased Vibration Resistance.
Part number DL80 3764K
Dobinsons 4x4 LED Driving Lights are designed to give great light output long lifespan and come in a variety of sizes all while maintaining an affordable price. This pair of 90 Watt 7Inch LED Driving Lights feature 18 x 5W 6000K Cree LED bulbs per light These lights have 50 000 hours lifespan 6500K color 7200 Operating Lumen Output per Light IP68 Water & Dust Proof rating Heavy Duty Steel Mounting Base with Locking Bolts for Increased Vibration Resistance Polycarbonate Lens Covers and Heat Dispursing Multi Fin Diecast Alloy Housings. This does not come with a wiring harness sold separately as part number DL80 3765 for a pair of driving lights.
DOBINSON 8.25 Inch LED Driving Light Pair
The Zenith 155 watt LED Driving light combines two years of research testing and development to offer the ultimate in LED driving light performance. Combining 4 x 20 watt extra deep dish long distance LED chips and 15 x 5 watt spread LED chips the Zenith driving light has been designed tested and proven in Australia to provide a combination of long distance and a close spread of clear white light. The 8.25” multi fin alloy housing combined with a heavy duty steel mounting bracket and polycarbonate lens ensures the Zenith Driving light will continue to perform in the harshest terrain.
Features:
4 x 20 Watt 6000K Long Distance Centre LED’s
15 x 5 Watt 6000K Spread Centre LED’s
IP68 Water & Dust Proof Rating
155 Watt 9 to 32V DC
12 700 Raw Lumens
Highly resistent to vibration and corrosion
Polycarbonate Smash Resistant Lens
Heavy Duty Braced Steel Mount
8.25 Multi Finned Heat Dispersing Alloy Housing
Dobinsons 4 by 4 140 AMP Dual Battery Wiring Kit with LCD Voltage Monitor and Automatic Solenoid
DOBINSONS 4X4 140 AMP DUAL BATTERY WIRING KIT WITH LCD VOLTAGE MONITOR AND AUTOMATIC SOLENOID
13.3V cut in 12.8V cut out Ignition Protected
Includes all hardware 5m (15ft) cables
Reversible LCD Display screen for upside down mounting if desired
Displays both battery readings simultaneously
Suitable for 4x4's Trucks Vans Trailers
This is a complete dual battery kit (without battery tray) which provides automatic voltage sensitive battery isolation through the relay provided. It is ignition protected includes all installation hardware generous 5 meter (15ft) long cables to cover rear mounted batteries reversible display screen for overhead & foot well mounting and dual voltage display monitor with backlit LCD screen displaying both battery readings simultaneously. EA80 3830 Dual battery kit fitting guide This is an ideal kit for those 4x4 owners who have added a lot of additional 12V accessories on their vehicles and need to split the load across 2 batteries. This kit includes everything you will need electronically but you will need to provide your own 2nd battery mount. The complete kit contains: 140 Amp Voltage Sensitive Isolator 5m (15ft) Heavy Duty Red and Black Cables 10m (30ft) of Split Conduit Dual Display LCD Voltage Monitor 2 x Battery Terminals 6 x Cable Lugs and Heat Shrink Mounting Screws and Crimping Lugs
Features: Automatic Voltage Sensitive Battery Isolation 13.3 Volt Cut In 12.8 Volt Cut Out Ignition Protected Dual Display Voltage Monitor (Backlit LCD Screen) Displays both Battery Readings Simultaneously Reversible Display Screen for Overhead and Footwell Mounting All Installation Hardware Included All Cables 5m in Length for Rear Mounted Batteries IMPORTANT NOTICE: Does not suit Ford PX Ranger as vehicle is equipped with a Smart Charge alternator. Vehicle requires DC to DC charger for Dual Battery Setup OR Vehicle requires Ford dealer to perform Smart Charge Disconnect (This may affect vehicle performance and economy).
Kit Includes: 5m Heavy Duty Black & Red Cables 140 Amp Voltage Sensitive Isolater 10 Metres of Split Conduit Dual Display LCD Voltage Monitor 2 x Battery Terminals 6 x Cable Lugs and Heat Shrinks Mounting Screws and Crimping Lugs.
DOBINSON 12 Watt 1000 Lumen 4Inch Round
4 Inch Round
IP68 water & dust proof
Adjustable mount
4 x 3 watt Cree LED bulbs
Impact resistant lens cover
Fits in most 100mm fog light mounting openings
Heat dispersing diecast alloy housing
1 000 raw lumens each
30 000 hours lifespan
100mm (4”) diameter
12 watt 10 30v DC
Colour 6000k
Sold as a kit (contains 1 x lights 1 x clear lens cover)
*Can be used to replace Fog Lights as Driving Lights (may require some bracket fabrication not suitable as fog lights)
Baja Designs LP9 Single Rock Guard
This rock guard/light cover fits the LP9. It is designed to protect from harsh terrain that may throw dirt, dust and rocks at your LP9 LED lights. If you are looking for extra protection from your riding environments and a cool cover, then the LP9 rock guard is your answer!
Baja Designs OnX6 S8 XL Pro and Sport Harness 2 Light Max 150 Watts
This harness is designed specifically for the Baja Designs OnX6 Plus, and the S8 light bar. The harness is rated for x1 10 inch-20 inch OnX6 light bar, or x1 10 inch-30 inch S8 light bar. We spend a substantial amount of time developing these harnesses to ensure they are safe, and reliable for your adventures. The installation of this harness is simple, the harness has positive and negative terminals to be ran to your battery. The harness has 1 plug for the OnX6 Plus or S8 that easily plugs in using a weather resistant connector. The rest is a matter of routing throughout your vehicle.