Gayar now has an application
Download it now
Customer Service
22274775
Bin Dousr
Choose your vehicle
Vehicle Type
Car
Vehicle Make
Vehicle Model
Vehicle Generation
Vehicle Serie
Engine
Latest Products
- Dobinsons High-Output Air Compressor
Dobinson's latest high-output Air Compressor has been designed and tested in Australia to combine high volume air-flow for quick tyre inflation as well an integrated air tank, pressure cut-off switch and auxiliary ports for a variety of different applications. Features 170L/ minute Air Flow Integrated Air Tank 2 x 1/8” NPT Auxiliary fittings Carry Bag 6.5 m Rubber Hose Pressure Cut Off Switch Safety Release Valve Removable Base for Permanent Mounting Quick Release Tyre Chuck Specifications Nozzle Adapters Pressure Gauge & Fuse Voltage: 12 Volts DC Motor Rating: 700 Watts Max Current Draw: 60 Amps Air Flow: 170L per minute Maximum Pressure: 125 PSI Cylinder Diameter: 60mm Full Metal Duty Cycle: 40min at 40 psi at 20°C Overload: 90 Amp Air Hose: Rubber 6.5 metre Air Tank Size: 0.19 Litres Approx Auxiliary Tank Fittings: 1/8” NPT Pressure Switch Cut-Off: 125 Psi Pressure Switch Cut-In: 90 Psi Dimensions mm (L x H x W): 340 x 240 x 15
Availability: In Stock
130.000 KWD
- BUSHINDABA Cruiser Duo Front Armrest Walnut Beige These Front Door Cruiser Duo Armrests - integrate with the Cruisers dashboard while complementing the interior with a solid Walnut wood finish. They install in seconds using our “Magnetic Quick Fit” system and the cupholders location allows for clear vision of either side mirror and provides any beverage protection from the wind. - Magnetic Quick Fit - Integrated Cupholder (70mm Ø) - Solid Walnut Wood Inlay Includes both the Left and Right Armrest.
Availability: In Stock
66.000 KWD
- BUSHINDABA Cruiser Duo Front Armrest Walnut Black These Front Door Cruiser Duo Armrests - integrate with the Cruisers dashboard while complementing the interior with a solid Walnut wood finish. They install in seconds using our “Magnetic Quick Fit” system and the cupholders location allows for clear vision of either side mirror and provides any beverage protection from the wind. - Magnetic Quick Fit - Integrated Cupholder (70mm Ø) - Solid Walnut Wood Inlay Includes both the Left and Right Armrest.
Availability: In Stock
66.000 KWD
- BUSHINDABA Cruiser Duo Front Armrest Walnut Grey These Front Door Cruiser Duo Armrests - integrate with the Cruisers dashboard while complementing the interior with a solid Walnut wood finish. They install in seconds using our “Magnetic Quick Fit” system and the cupholders location allows for clear vision of either side mirror and provides any beverage protection from the wind. - Magnetic Quick Fit - Integrated Cupholder (70mm Ø) - Solid Walnut Wood Inlay Includes both the Left and Right Armrest.
Availability: In Stock
66.000 KWD
- SURVIVAL First Aid KIT Pet
Description
If you’ve got four-legged friends in your family, or know that certain someone who loves Fido more than life itself, SURVIVAL’s radical new Pet First Aid KIT is the must-have pet product for everyday and emergency use.
Expertly designed to sit perfectly on your hip with a clever waist belt attachment, this pet powerhouse provides easy access to every accessory, treat and first aid tool your favourite furry friend will ever need.
Never again will you need to search through your belongings for a pet poo bag -- swiftly dispose of your doggy doo-doo, with eco-friendly disposal bags located in an easily accessible exterior pocket.
And a zippered pouch for treats means you can reward your favourite fur balls quickly and easily, while keeping all canine goodies safe and secure whenever you’re on the go.
Perfect for the home, car or daily ‘walkies’ adventures, this ground-breaking Pet First Aid KIT features everything you need to keep your beloved furry friends satisfied and safe - and their humans, too!
+ Other highlights include:
Conforming Pet Bandages including SURVIVAL’s SMART Bandage: The key tool to effectively manage potentially deadly snake and Funnel-web spider bites on pets and humans. A snake bite instruction card is also included in this KIT.
Digital Thermometer: Monitor the temperature of your four-legged friends to ensure they don’t overheat.
Muzzle Pocket: A pocket in the KIT to keep a collapsible muzzle. Please note that a muzzle is not included in this KIT.
Silicon Pet Bowl: Give your pet food or water no matter where you are.
Tick Removal Spoon & Tweezers: Specifically designed to remove a tick that has attached itself to the body.
Shears: Clip away any nasties.
Waist & Shoulder Straps: Swap from waist belt attachment to carry securely on your shoulder, making it portable and easily accessible for walks or hikes. PLUS, the Shoulder Strap doubles as a dog lead!
Vital first aid supplies: Including dressings, swabs, emergency foil blanket and skin cleaning wipes can be used to treat animals and humans alike.
+ Dimensions & Weight
Dimensions When Closed: 19cm High | 16.5cm Wide | 10cm Deep
Weight: 1.05kg
Availability: In Stock
32.000 KWD
SALE
- The Bosch Company 6-place camping dining set
The Canopy Shelf Dining Set 6 Place from The Bush Company is a fantastic solution to maximise the storage in your canopy gull wing shelves, and incorporates all of the practical design features and quality manufacturing that The Bush Company products are renowned for.
The bag is made from 420g thick rip stop canvas and has high quality YKK zippers. The dimensions of the bag are: Height 460mm, Width 600mm, Depth at Base 300mm, Depth at Top 100mm. All of the crockery is made from high quality melamine and is microwave safe, there are dedicated storage holders for your dinner plates (these are full size meat platters), side plates, bowls, mugs and tall glasses (real glass), as well as the 6 person stainless steel cutlery set which includes additional steak knives. The adjustable shoulder strap makes it easy to transport the whole set to your camping spot.
Outer Bag Material – heavy rip stop canvas, reinforced back, base and sides.
Inner Bag Material – heavy duty ripstop canvas sides with clear plastic lid.
Shoulder Strap
Zips – quality YKK fasteners
Quantity – 4 bags, 2 large, 2 medium
Dimensions – Depth Base 300mm Top 100mm, 460mm W, 600mm H
Availability: In Stock
83.000 KWD 109.000 KWD
SALE
- The Bosch Company 6 Place Camping Dining Set
The Canopy Shelf Dining Set 6 Place from The Bush Company is a fantastic solution to maximise the storage in your canopy gull wing shelves, and incorporates all of the practical design features and quality manufacturing that The Bush Company products are renowned for.
The bag is made from 420g thick rip stop canvas and has high quality YKK zippers. The dimensions of the bag are: Height 460mm, Width 600mm, Depth at Base 300mm, Depth at Top 100mm. All of the crockery is made from high quality melamine and is microwave safe, there are dedicated storage holders for your dinner plates (these are full size meat platters), side plates, bowls, mugs and tall glasses (real glass), as well as the 6 person stainless steel cutlery set which includes additional steak knives. The adjustable shoulder strap makes it easy to transport the whole set to your camping spot.
Outer Bag Material – heavy rip stop canvas, reinforced back, base and sides.
Inner Bag Material – heavy duty ripstop canvas sides with clear plastic lid.
Shoulder Strap
Zips – quality YKK fasteners
Quantity – 4 bags, 2 large, 2 medium
Dimensions – Depth Base 300mm Top 100mm, 460mm W, 600mm H
Availability: In Stock
75.000 KWD 98.000 KWD
- The Bosch Company Recovery Bag
The Bush Company Recovery Bag is great for storing your recovery straps| shackles and snatch blocks or simply use it to store your air compressor and air gages. The bag is made from high quality ripstop canvas and has a webbed shoulder strap and two front straps with clip buckles. There are two side pockets and the bag has a large front pocket as well.
With the added reflective strips this bag can be used an additional warning beacon during night recoveries or breakdowns| and can double as a winch damper/blanket if required.
Availability: In Stock
14.000 KWD
- Dobinsons Kinetic Tow Recovery Rope 9.14M 13.100Ton
Dobinsons 4x4 Kinetic Recovery Ropes are all rated to their listed capacity, and offer a 30% Stretch Factor, giving almost 50% more stretch than a conventional snatch strap. The strap will store kinetic energy exerted on it, making it up to 30% longer than normal (39ft max) and then use that force to help pull the stuck vehicle out. Each strap features Protective Sleeves over the ends to prevent the strap from being cut, rendering it unusable. The 4x4 Straps are intended to be fully cleaned in water only after each use to ensure that the dust/dirt does not become abrasive to the strap, shortening the life span. The easiest way to do this is to lay it out in your driveway and hose with fresh clean water, or rinse in a large bucket, constantly changing out the water as it becomes dirty. ADVISORY: The minimum breaking strength of the strap should be between 2 and 3 times the gross vehicle mass (GVM) of the vehicle. The strap MUST be suited to the GVM of the lighter of the 2 vehicles used in the recovery process.
Availability: In Stock
66.000 KWD
SALE
- EXTREMEAIRE MAGNUM Expedition Portable Compressor
All the great features and performance of the ExtremeAire Magnum compressor in a portable package. Easy to use from vehicle to vehicle with our top of the line USA made waterproof submersible storage case. The plastic design is dent proof and scratch proof. The case can be laid flat, on its side or on its back spine for multiple storage options. The ExtremeAire Magnum Expedition’s storage case allows for items to be stacked on top of it for easier packing inside your vehicle. Additional upgrades include more air hose length and updated jumper cable design.
Technical Specifications:
– 3 m of 4 gauge jumper cables with full size battery terminal clamps
– 11.27 m of Polyurethane coil hose with hose whips on each end
– 14.3 m of reach from the battery to the end of air hose!!
– Anderson quick connectors on all electrical ends
– LED flashlight with rubber mouthpiece
– Chrome pencil style pressure gauge
– Safety glasses
– Gloves
– All air fittings, quick disconnects and air chucks are solid brass
– All mounting hardware is stainless steel
– Box dimension: 48.26 cm long x 38.1 cm deep x 22.86 cm tall
– Weight: 16 kg
Warranty
All products sold by EOP are warranted to be free from defects in materials and workmanship for a period of one year (unless otherwise noted) from original date or purchase. This warranty is for the original purchaser and is non-transferable. EOP’s limit of liability under this warranty is to repair or replace the product at EOP’s option.
Consequential costs such as, but not limited to labor fees, loss of use, loss of time or freight charges are not covered. Any product that is abused, altered, incorrectly installed or used in competition is not covered. Failure to follow recommended installation and servicing procedures, modifications, alteration or improper use will void this warranty.
Availability: In Stock
255.000 KWD 300.000 KWD
- DOBINSON Front Struts for Chevrolet Silvarado Sierra 1500 2019 - 2021
Fully re buildable and re valvable
Zero shock fade in all terrains with full load
Direct bolt on replacement for easy fitment
Corrosion resistant (EDP Surface Protection)
Heavy duty single piece lower leg
Enormous oil capacity
Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
Race inspired hi flow CNC 6061 Billet alloy piston 60mm bore – for the ultimate in offroad handling
66mm 2.6” Bodied Series
These do not come with coil springs or top mounts.
Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot harsh demanding conditions. By utilising the monotube design Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads long or hard working 4WD trips towing or racing conditions. The larger 50 and 60mm high flow pistons reduce internal pressures reduce the heat generated transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. The micropolished hard chromed and heat treat shock shaft CNC aluminium high flow race inspired piston and DOM seamless tubing body provides the ultimate in performance and off road durability. Composite piston wear bands high quality Fuchs oil and a race style 3 stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort handling vehicle control and off road performance Enjoy the rideFully re buildable and re valvable
Zero shock fade in all terrains with full load
Direct bolt on replacement for easy fitment
Corrosion resistant (EDP Surface Protection)
Heavy duty single piece lower leg
Enormous oil capacity
Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
Race inspired hi flow CNC 6061 Billet alloy piston 60mm bore – for the ultimate in offroad handling
66mm 2.6” Bodied Series
These do not come with coil springs or top mounts.
Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot harsh demanding conditions. By utilising the monotube design Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads long or hard working 4WD trips towing or racing conditions. The larger 50 and 60mm high flow pistons reduce internal pressures reduce the heat generated transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. The micropolished hard chromed and heat treat shock shaft CNC aluminium high flow race inspired piston and DOM seamless tubing body provides the ultimate in performance and off road durability. Composite piston wear bands high quality Fuchs oil and a race style 3 stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort handling vehicle control and off road performance Enjoy the ride
Availability: In Stock
95.000 KWD
- DOBINSON Front MRR 3 Way Adjustable Struts For Toyota Landcruiser 200 Series 2008 - 2021
3 way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
10 Stage High Speed Compression For aggressive high speed off roading through ruts and holes.
20 Stage Low Speed Compression For creepy crawling and cornering
15 Stage Rebound Control your coils prevent bucking
60mm CNC Machined High Flow Billet Aluminium Race Piston
3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to 0.04mm
Upgraded 3 Stage FKM‐HNBR Sealing System
TSUGAMITM CNC machined components for precise tolerances
ParkerTM Braided High Pressure Hoses
5140 HV900 Hard Chrome Plated Heat treated 18mm Micro Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
T6 6061 Height Adjustable Spring Seat
Carbon Fibre PTFE Disulphide composite wear band for the ultimate in low friction low‐wear performance
60mm Full 6063 aluminum remote reservoir
Lightweight CNC Machined Low Friction floating piston
High Quality O.E.M. Grade Natural Rubber Bushings
Single Piece Lower Leg
EDP Surface Protection
Direct Bolt On Design
CNC TIG Precision Welded Body End Mounts
Fully Rebuildable Design
Availability: In Stock
190.000 KWD
- 1 (current)
- 2
- 3
- 4
- 5