BISON Silicone High Temperature Sealant Red Card 60 mL

BISON Silicone High Temperature Sealant Red Card 60 mL Heat resistant upon complete curing up to 260°C and briefly (approximately 1 hour) up to a maximum of 300°C Easy to apply, Not paintable Sealant may expand when it comes into contact with grease, oil, coolant and fuels. Instruction to Use : Inject sealant evenly and slowly into the joint. Immediately smooth with a finger and soapy water. For bonding, join the parts within 5 minutes. After approx. 5 minutes, surface skin will form. BISON High Temp reaches its high heat resistance after fully curing. The curing can be accelerated by heating the sealant to a maximum of 150°C. Points of attention: Silicone hardens under the influence of humidity. Contact with humidity is therefore absolutely necessary during curing. Storage conditions: Store upright and well-closed at a temperature between +5°C and +25°C.